General

ZGS□ -F/35 series of wind turbines with a combined transformer(hereinatter referred to as combined variable) is a wind turbine components will be sent to the high voltage of 0.6-0.9kV after 35kV, and net output of special equipment. Different from the traditional box-type substation, the high voltage load switch, fuse, and high-voltage components and the transformer device body, no circuit tap were sealed in two separate oil chamber, the structure by Minato. According to the configuration of low-voltage power distribution needs.

The product is used in a variety of wind power sites, are the best supporting wind power systems products.

Using the environment conditions

1 .Coling: Air from the cold 2.Use conditions:

Outdoor ambient temperature is not high-pressure 40℃, not less than -25℃. Altitude of not more than 1000m, the average monthly temperature does not exceed 30℃, the average temperature does not exceed 20℃. At 25℃. Air humidity of less than 95% compared to an average of no more than 90% of the month.

Level of acceleration is less than 0.3g, the vertical acceleration is not greater than 0.15g.

Installation environment should be no contamination, non-explosuve, corrosive gases and dust, the installation site should be on severe shock and vibration. Require the installation of the concrete platform or other flat, solid platform.

Note: Other than the technology, by the user and the company consultations.

Featuresl

Small size, compact structure, easy installation;

Full closure, full insulation, a reliable guarantee for personal safety；

Can be used for ring can also be used for the terminal, conversion convenient； Low damage, low noise, superior performance；

Box using security structure；

Low temperature rise, overload capability.